Revues scientifiques – 2021

Blanchet, P. and Pepin, S. (2021). Trends in wood surface improvements and modifications: A review of the last five years. Coatings. 11(12): 1514.

Blanquet du Chayla, C., Blanchet, P., & Lehoux, N. (2021). A Method to Qualify the Impacts of Certifications for Prefabricated Constructions. Buildings11(8), 331.

Bouchard, R., Salenikovich, A., Frenette, C., & Bedard-Blanchet, G. (2021). Experimental investigation of joints with multiple glued-in rods in glued-laminated timber under axial tensile loading. Construction and Building Materials293, 122614.

Brial, V., Tran, H., Ouellet-Plamondon, C., Sorelli, L., Conciatori, D. (2021). Evaluation of the reactivity of treated spent pot lining from primary aluminum production as contentious materials. Cement and Concrete Research. 170: 105584.

Cabral, M. R., & Blanchet, P. (2021). A State of the Art of the Overall Energy Efficiency of Wood Buildings—An Overview and Future Possibilities. Materials14(8), 1848.

Calvez, I., Szczepanski, C. R., & Landry, V. (2021). Preparation and characterization of low gloss UV-curable coatings based on silica surface modification using an acrylate monomer. Progress in Organic Coatings158, 106369.

Chen, Z., & Sorelli, L. (2021). Effect of relative humidity and porosity on the logarithmic creep of the layered C–S–H minerals tobermorite and jennite. Cement and Concrete Composites116, 103872.

Cid, A., Blanchet, P., Robichaud, F., & Kinuani, N. (2021). Estimating Wooden Prefabricated Building Export Potential from the Province of Quebec to the Northeastern United States. BioResources16(4).

Coops, N., Achim, A., Arp P., …, Woods, M.E. Advancing the application of remote sensing for forest information needs in Canada: Lessons learned from a national collaboration of university, industrial and government stakeholders. The Forestry Chronicle. 97(02): 109-126.

Cordier, S., Robichaud, F., Blanchet, P., & Amor, B. (2021). Regional environmental life cycle consequences of material substitutions: The case of increasing wood structures for non-residential buildings. Journal of Cleaner Production328, 129671.

Côté, S., Beauregard, R., Margni, M., & Bélanger, L. (2021). Using Naturalness for Assessing the Impact of Forestry and Protection on the Quality of Ecosystems in Life Cycle Assessment. Sustainability13(16), 8859.

Daassi, R., Kasangana, P. B., Khasa, D. P., & Stevanovic, T. (2021). Monitoring transformation of two tropical lignocellulosics and their lignins after residence in Benin soils. Scientific reports11(1), 1-15.

Duc Pham T., Sorelli L., Fafard M., Minh Ngoc V. (2021). Hydromechanical couplings of reinforced tensioned members of steel fiber reinforced concrete by dual lattice mode, International Journal for Numerical and Analytical Methods in geomechanics. Journal for Numerical and Analytical Methods in Geomechanics. 45.2: 191-207.

Duchesne, I., Galstian, T., Sorelli, L., Rodrigue, D., Fabbri, F., & Fafard, M. (2021). Photodynamic control of bacterial motility by means of azobenzene molecules. Journal of Photochemistry and Photobiology8, 100074.

Dupuis, É., Thiffault, E., Barrette, J., Adjallé, K., & Martineau, C. (2021). Bioenergy Conversion Potential of Decaying Hardwoods. Energies14(1), 93.

Elloumi, I., Hernández, R. E., Cáceres, C. B., & Blais, C. (2021). Effects of Temperature and Moisture Content of Logs on Size Distribution of Black Spruce Chips Produced by a Chipper-canter at Two Cutting Widths. BioResources16(4).

Frech-Baronet, J., Sorelli, L., & Chen, Z. (2021). Effect of plasticity on the experimental characterization of the creep property of a cement paste: Spherical vs. conical microindentation. Cement and Concrete Research141, 106290.

Frias, M., Blanchet, P., Bégin-Drolet, A., Triquet, J., & Landry, V. (2021). Parametric study of a yellow birch surface impregnation process. European Journal of Wood and Wood Products, 1-10.

Garcia, R. A., Stevanovic, T., Berthier, J., Njamen, G., Tolnai, B., & Achim, A. (2021). Cellulose, Nanocellulose, and Antimicrobial Materials for the Manufacture of Disposable Face Masks: A Review. BioResources16(2).

Gauthray-Guyénet, V., Schneider, R., Achim, A., Fortin, M., Paré, D., & Arseneault, D. (2021). Legacy of forest composition and changes over the long-term on tree radial growth. Canadian Journal of Forest Research, (ja).

Gosselin, A., Cimon, Y., Lehoux, N., & Blanchet, P. (2021). Main Features of the Timber Structure Building Industry Business Models. Buildings11(4), 170.

Guimarães, L. G. D. A., Blanchet, P., & Cimon, Y. (2021). Collaboration among Small and Medium-Sized Enterprises as Part of Internationalization: A Systematic Review. Administrative Sciences11(4), 153.

Harel, A., Thiffault, E., & Paré, D. (2021). Ageing forests and carbon storage: a case study in boreal balsam fir stands. Forestry: An International Journal of Forest Research.

Head, M., Magnan, M., Kurz, W. A., Levasseur, A., Beauregard, R., & Margni, M. (2021). Temporally-differentiated biogenic carbon accounting of wood building product life cycles. SN Applied Sciences3(1), 1-17.

Hermann, A., Burr, D., Landry, V. (2021). Comparative study of the impact of additives against oxygen inhibition additives pendulum hardness and abrasion resistance for UV-curable wood finishes.Progress in Organic Coatings. 156: 106266.

Hermann, A., Giljean, S., Pac, M. J., Marsiquet, C., Beaufils-Marquet, M., Burr, D., & Landry, V. (2021). Understanding indentation, scratch and wear behavior of UV-cured wood finishing products. Progress in Organic Coatings161, 106504.

Hussain, A., Landry, V., Blanchet, P., Hoang, D. T., & Dagenais, C. (2021). Fire performance of intumescent waterborne coatings with encapsulated APP for wood constructions. Coatings11(11), 1272.

Hussain, A., & Blanchet, P. (2021). Preparation of Breathable Cellulose Based Polymeric Membranes with Enhanced Water Resistance for the Building Industry. Materials14(15), 4310.

Jobidon, G., Lemieux, P., & Beauregard, R. (2021). Building Information Modeling in Quebec’s Procurement for Public Infrastructure: A Case for Integrated Project Delivery. Laws10(2), 43.

Kharrat, W., Hernández, R. E., Cáceres, C. B., & Blais, C. (2021). Effects of radial force and log position on the stem on ring-debarker efficiency in frozen black spruce logs. Wood Material Science & Engineering16(3), 211-220.

Kharrat, W., Hernández, R. E., Cáceres, C. B., & Blais, C. (2021). Influence of radial force and rake angle on ring debarking efficiency of frozen and unfrozen black spruce logs. European Journal of Wood and Wood Products79(3), 629-643.

Lamothe, S., Sorelli, L., Blanchet, P., & Galimard, P. (2021). Lightweight and slender timber-concrete composite floors made of CLT-HPC and CLT-UHPC with ductile notch connectors. Engineering Structures243, 112409.

Larivière-Lajoie, R., Blanchet, P., & Amor, B. (2022). Evaluating the importance of the embodied impacts of wall assemblies in the context of a low environmental impact energy mix. Building and Environment207, 108534.

Larouche, J., Rioux, D., Bardekjian, A. C., & Gélinas, N. (2021). Urban forestry research needs identified by Canadian municipalities. The Forestry Chronicle97(2), 158-167.

Laurent, A. B., Beauregard, R., & D’Amours, S. (2021). Activity-Based Life-Cycle Costing applied to an innovative forestry company product portfolio. Economics, Management and Sustainability6(1), 6-26.

Létourneau-Gagnon, M., Dagenais, C., & Blanchet, P. (2021). Fire Performance of Self-Tapping Screws in Tall Mass-Timber Buildings. Applied Sciences11(8), 3579.

Li, R., He, C., Chen, Y., & Wang, X. (2021). Effects of laser parameters on the width of color change area of poplar wood surface during a single irradiation. European Journal of Wood and Wood Products, 1-8.

Li, R., He, C., & Wang, X. (2021). Evaluation and Modeling of Processability of Laser Removal Technique for Bamboo Outer Layer. JOM, 1-8.

Morin-Bernard, A., Blanchet, P., Dagenais, C., & Achim, A. (2021). Glued-laminated timber from northern hardwoods: Effect of finger-joint profile on lamellae tensile strength. Construction and Building Materials271, 121591.

Naud, N., Sorelli, L., Salenikovich, A., & Cuerrier-Auclair, S. (2021). Fostering a cast-in-place steel–UHPFRC connector for ductile timber–concrete composite structures: parametric study of the shear behaviour and design considerations. Canadian Journal of Civil Engineering48(9), 1081-1092.

Paquet, C., Brown, S., Klemberg-Sapieha, J.E., Morin, J.-F., Landry, V. (2021). Self-Healing UV Curable Acrylate Coatings forWood Finishing System, Part 2: Impact of monomer structure and self-healingsparameters on self-healing efficiency. Coatings MDPI. 11(11): 1328.

Pedneault, J., Desjardins, V., Margni, M., Conciatori, D., Fafard, M., & Sorelli, L. (2021). Economic and environmental life cycle assessment of a short-span aluminium composite bridge deck in Canada. Journal of Cleaner Production310, 127405.

Pham, D. T., Sorelli, L., Fafard, M., & Vu, M. N. (2021). Hydromechanical couplings of reinforced tensioned members of steel fiber reinforced concrete by dual lattice model. International Journal for Numerical and Analytical Methods in Geomechanics45(2), 191-207.

Provete Vincler, J., Sanchez, T., Majidi, B., Sorelli, L., & Conciatori, D. (2021). Investigation on the Limitations of Accelerated Migration Test Applied to UHPFRC with Steel Fibers. Journal of Materials in Civil Engineering33(3), 04020494.

Roussel, J. R., Achim, A., & Auty, D. (2021). Classification of high-voltage power line structures in low density ALS data acquired over broad non-urban areas. PeerJ Computer Science7, e672.

Royal, S., Lehoux, N., & Blanchet, P. (2021). Comparative case study research: an international analysis of nine home warranty schemes. International Journal of Building Pathology and Adaptation.

Royal, S., Lehoux, N., & Blanchet, P. (2021). New home warranty schemes: developing a theoretical comparative framework using qualitative content analysis. International Journal of Building Pathology and Adaptation.

Segovia, F., Blanchet, P., & Essoua, G. G. E. (2021). Potential of the crude glycerol and citric acid mixture as a binder in medium-density fiberboard manufacturing. European Journal of Wood and Wood Products, 1-11.

Soro, A., Lenz, P., Hassegawa, M., Roussel, J. R., Bousquet, J., & Achim, A. (2021). Genetic influence on components of wood density variation in white spruce. Forestry: An International Journal of Forest Research.

Soula, M., Samyn, F., Duquesne, S., & Landry, V. (2021). Innovative Polyelectrolyte Treatment to Flame-Retard Wood. Polymers13(17), 2884.

St-Jean, É., Meunier, S., Nolet, P., Messier, C., & Achim, A. (2021). Increased levels of harvest may favour sugar maple regeneration over American beech in northern hardwoods. Forest Ecology and Management499, 119607.

Sylvain, J. D., Anctil, F., & Thiffault, É. (2021). Using bias correction and ensemble modelling for predictive mapping and related uncertainty: a case study in digital soil mapping. Geoderma403, 115153.

Torquato, L. P., Hernández, R. E., Duchesne, I., Auty, D., & Achim, A. (2021). Black spruce trees from uneven-aged, old-growth stands produce more dimensionally stable wood than trees from fire-origin even-aged stands. Wood Science and Technology55(5), 1457-1483.

Triquet, J., Blanchet, P., & Landry, V. (2021). Chemical surface densification of hardwood through lateral monomer impregnation and in situ electron beam polymerization, Part I: density profile and surface hardness of three hardwood species. Journal of Materials Science56(19), 11309-11323.

Triquet, J., Blanchet, P., & Landry, V. (2021). Hardness of chemically densified Yellow birch in relation to wood density, polymer content and polymer properties. Holzforschung75(2), 114-125.

Wei, Q., Wu, Z., Wei, W., Aladejana, J. T., Yves, K. G., Li, D., … & Xie, Y. (2021). Optimization of hot-press parameters for plywood with environmental aluminophosphate adhesive. BioResources16(1), 1702.

Wellenreiter, P., Hernandez, R. E., Cáceres, C., & Blais, C. (2021). Effects of helix angle and feed per knife on cutting forces, noise, and power consumption produced during helical planing of sugar maple wood. Canadian Journal of Forest Research, (ja).

Wu, Z., Chen, T., Aladejana, J. T., Guelifack, Y. K., Li, D., Hou, X., … & Xie, Y. (2021). Hierarchical Lamellar Aluminophosphate Inorganic Materials for Medium Density Fiberboard with Good Fire Performance. Journal of Industrial and Engineering Chemistry98, 180-188.

Wu, Z., Chen, T., Aladejana, J. T., Zhang, Z., Liang, S., Xiao, Y., … & Xie, Y. (2021). Eco-benign PVA/aluminum phosphate as an alternative to formaldehyde-based adhesives in wood-based panels. RSC Advances11(54), 34416-34423.

Xu, W., Chen, P., Yang, Y., Wang, X., & Liu, X. (2021). Effects of freezing and steam treatments on the permeability of Populus tomentosa. Materialwissenschaft und Werkstofftechnik, 52(8), 907-915.

Yang, Y; Xu, W; Liu, X; Wang, X. (2021). Study on permeability of cunninghamia lanceolata based on steam treatment and freeze treatment. Wood Research. 66(5): 721-731.

Zhu, Z., Dong, W., Wang, X., Guo, X., Wu, Z. (2021). Noise characteristics of tungsten circular blade during sawing of medium density fiberboard. Science of Advanced Materials. 13(9): 1781-1788.