Revues scientifiques – 2013

Agudelo, D., Bourassa, P., Beauregard, M., Bérubé, G., Tajmir-Riahi, H.-A. 2013. tRNA binding to anitumor drug doxorubicin and its analogue. PLoS ONE 8(7):: e69248. DOI: 10.1371/journal.pone.0069248.

Ali Ahmed, S., Morén, T., Hagman, O., Cloutier, A., Fang, C.-H., Elustondo, D. 2013. Anatomical properties and process parameters affecting blister/blow formation indensified european aspen and downy birch sapwood boards by thermo-hygro-mechanical compression. Journal of Materials Science 48(24): 8571-8579.

Auty, D., Gardiner, B.A., Achim, A., Moore, J.R., Cameron, A.D. 2013. Models for predicting microfibril angle variation in Scots pine. Annals of Forest Science DOI 10.1007/s13595-012-0248-6.

Belkhir, S., Koubaa, A., Khadhri, A., Ksontini, M., Nadj, H., Smiti, S., Stevanovic, T. 2013. Seasonal effect on the chemical composition of the leaves of Stipa tenacissima L. and implications for pulp properties. Industrial Crops and Products 44: 56-61.

Belleville, B., Stevanovic, T., Cloutier, A., Pizzi, A., Prado, M., Erakovic, S., Diouf, P.N., Royer, M. 2013. An investigation of thermochemical changes in Canadian hardwood species during wood welding. European Journal  of wood and wood products. 71(2): 245-257.

Belleville, B., Stevanovic, T., Cloutier, A., Pizzi, A., Salenikovich, A., Blanchet, P. 2013. Production and properties of wood-welded panels made from two Canadian hardwoods. Wood Science and Technology 47: 1005-1018.

Belleville, B., Stevanovic, T., Pizzi, A., Cloutier, A., Blanchet, P. 2013. Determination of optimal wood-dowel welding parameters for two North American hardwood species. Journal of Adhesion Science and Technology 27(5-6): 566-576.

Bouafif, H., Koubaa, A., Perré, P., Cloutier, A. 2013. Creep behaviour of HDPE/wood particle composites. International Journal of Microstructure and Materials Properties 8(3): 225-238.

Bourai, K., Riedl, B., Rodrigue, D. 2013. Effect of temperature on the thermal conductivity of wood-plastic composites. Polymers and Polymer Composites 21(7): 413-422.

Bouslimi, B., Koubaa, A., Bergeron, Y. 2013. Variation of brown rot decay in eastern white cedar (Thuja occidentalisL.). Bioresources 8(3): 4735-4755.

Bustos, C., Hernández, RE., Beauregard, R., Mohammad, M. 2013. Influence of machining parameters on the structural performance of finger-joined black spruce. Wood and Fiber Science 36(3): 359-367.

Charbonneau, D.M., Beauregard, M. 2013. Role of key salt bridges in thermostability of G. thermodenitrificansEstGtA2: Distinctive patterns within the new bacterial lipolytic enzyme family XV. PLoS ONE 8(10): e76675. DOI: 10.1371/journal.pone.0076675.

Chatelain, J.-F., Zaghbani, I., Lebrun, G., Hasni, K. 2013. Effect of support distance on damage of drilled thin CFRP laminates. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 7(9): 788-792.

Cobut, A., Beauregard, R., Blanchet, P. 2013. Using life cycle thinking to analyze environmental labelling: The case of appearance wood products. International Journal of Life Cycle Assessment 18(3): 722-742.

Ding, W.-D., Koubaa, A., Chaala, A. 2013. Mechanical properties of MMA-hardened hybride poplar wood. Industrial Crops and Products 46:304-310.

Diop, A., Bouazza, A.H., Daneault, C., Montplaisir, D. 2013. New ionic liquid for the dissolution on lignin. Bioresources 8(3): 4270-4282.

Diouf, P.N., Tibirna, C.M., Garcia Pérez, M.E., Royer, M., Dubé, P., Stevanovic, T. 2013. Structural elucidation of condensed tannin from Picea mariana bark. Journal of biomaterials and nanobiotechnology 4(3): 1-8. DOI: 10.4236/jbnb.2013.43A001.

Drouin, M., Blanchet, P., Beauregard, R. 2013. Characterization of the design function in the appearance of wood products for nonresidential buildings: A Conceptual framework. International Journal of Designed Objects 6(3): 1-16.

Duchateau, E., Longuetaud, F., Mothe, F., Auty, D., Achim, A. 2013. Modelling knot morphology as a function of external tree and branch attributes. Canadian Journal of Forest Research 43(3): 266-277.

Erakovic, S., Jankovic, A., Matic, I., Juranic, Z., Vukasinvoc-Sekulic, M., Stevanovic, T., Miskovic-Stankovic, V. 2013. Investigation of silver impact on hydroxyapatite/lignin coatings electrodeposited on titanium. Materials Chemistry and Physics 142(2-3): 521-530.

Erchiqui, F. Annasabi, Z., Koubaa, A., Slaoui-Hasnaoui, F., Kaddami, H. 2013. Numerical modelling of microwave heating of frozen wood. Canadian Journal of Chemical Engineering 91(9): 1582-1589.

Feng, Y., Martel, A., D’Amours, S., Beauregard, R. 2013. Coordinated decisions in a make-to-order manufacturing supply chain: A stochastic programming approach. Production and Operations Management 22(3): 642-660.

Gagné, L.V., Genet, A., Weiskittel, A., Achim, A. 2013. Assessing the potential stem growth and quality of yellow birch prior to restoration: A case study in eastern Canada. Forests 4(4): 766-785.

Garcia-Perez, M.-E., Stevanovic, T., Patrice, E. 2013. New therapies under development for psoriasis treatment. Current Opinion in Pediatrics 25(4): 480-487.

Genet, A., Auty, D., Achim, A., Bernier, M., Pothier, D., Cogliastro, A. 2013. Consequences of faster growth for wood density in northern red oak (Quercus rubra Liebl.). Forestry 86(1): 99-110.

Havreljuk, F., Achim, A., Pothier, D. 2013. Regional variation in the production of red heartwood in sugar maple and yellow birch. Canadian Journal of Forest Research 43(7): 649-657.

Hernández, R.E., Kuljich, S., Naffeti, O., Koubaa, A. 2013. Effect of the cutting speed on the surface quality of black spruce produced by a chipper-canter. Forest Products Journal 63(1-2): 39-46.

Huq, T., Khan, A., Khan, R.A., Riedl, B., Lacroix, M. 2013. Encapsulation of probiotic bacteria in biopolymeric system. Critical Reviews in Food Science and Nutrition 53(9): 909-916.

Kaboorani, A., Blanchet, P., Laghdir, A. 2013. A rapid method to assess viscoelastic and mechanosorptive creep in wood. Wood and Fiber Science 45(4): 370-382.

Kaboorani, A., Riedl, B., Blanchet, P. 2013. Ultrasonication technique: A method for dispersing nanoclay in wood adhesives. Journal of Nanomaterials – Special issue on Polymer Nanocomposite Processing, Characterization, and Applications DOI:10.1155/2013/341897.

Kazemi, Y., Cloutier, A., Rodrigue, D. 2013. Design analysis of three-layered structural composites based on post-consumer recycled plastics and wood residues. Composites 53: 1-9.

Kazemi, Y., Cloutier, A., Rodrigue, D. 2013. Mechanical and morphological properties of wood plastic composites based on municipal plastic waste. Polymer Composites 34(4): 487-493.

Korman, T.P., Sahachartsiri, B., Charbonneau, D.M., Huang, G., Beauregard, M., Bowie, J.U. 2013. Dieselzymes: development of a stable and methanol tolerant lipase for biodiesel production by directed evolution. Biotechnology for biofuels 6:70. DOI: 10.1186/1754-6834-6-70.

Kuljich, S., Cool, J., Hernández, R.E. 2013. Evaluation of two surfacing methods on black spruce wood in relation to gluing performance. Journal of Wood Science 59(3): 185-194.

Kuljich, S., Hernández, R.E., Llavé, A.M., Koubaa, A. 2013. Effects of cutting direction, rake angle, and depth of cut on cutting forces and surface quality of balsam fir wood. Wood and Fiber Science 45(2): 195-205.

Kuprevicius, A., Auty, D., Achim, A., Caspersen, J.P. 2013. Quantifying the influence of live crown ratio on the mechanical properties of clear wood. Forestry 36(3): 361-369.

Landry, V., Blanchet, P., Boivin, G. 2013. Metal Oxide Sol-Gels (ZrO2, AlO(OH), and SiO2) to improve the mechanical performance of wood substrates. Journal of Nanoparticles Volume 2013, Article ID 273204.

Landry, V., Blanchet, P., Cormier, L.M. 2013. Water-based and solvent-based stains: Impact on the grain raising in yellow birch. Bioresources 8(2): 1997-2009.

Landry, V., Blanchet, P., Zotig, L., Martel, T. 2013. Performance of exterior semitransparent PVDF-acrylic coatings. Journal of Coatings Technology and Research 10(1): 37-46.

Lebrun, G., Couture, A., Laperrière, L. 2013. Tensile and impregnation behaviour of unidirectional hemp/paper/epoxy and flax/paper/epoxy composites. Composite structures 103: 151-160. DOI: 10.1016/j.compstruct.2013.04.028.

Lenz, P., Auty, D., Achim, A., Beaulieu, J., Mackay, J. 2013. Genetic improvement of white spruce wood traits – Early screening by means of acoustic velocity. Forests 4(3): 575-594.

Le Roux, E., Diouf, P.N., Stevanovic, T. 2013. Characterization of the properties of thermally pre-treated forest biomass, J-FOR 2(4): 33-37.

Levasseur, O., Stafford, L., Gherardi, N., Naude, N., Beche, E., Esvan, J., Blanchet, P., Riedl, B., Sarkissian, A. Role of substrate outgassing on the formation dynamics of either hydrophillic or hydrophobic wood surfaces in atmospheric-pressure, oranosilicon plasmas. Surface and Coatings Technology 234: 42-47.

Lin, Y., Lanouette, R. 2013. Optimization of selective refining of sulphonated long fibres from jack pine: Refining energy and pulp properties. Journal of Science & Technology for Forest Products and Processes 3(1): 17-22.

Lin, Y., Lanouette, R. 2013. Production of mechanical pulp from jack pine: selective refining or whole-pulp refining? Journal of Science & Technology for Forest Products and Processes. 3(1): 23-31.

Ly, E.B., Brouillette, F. 2013. Understanding interactions between cellulose and phosphate esters in papermaking. American Journal of Materials Science 3(1): 19-23.

Mahfoudh, A., Cloutier, A., Rodrigue, D. 2013. Characterization of UHMWPE*wood composites produced via dry-bending and compression molding. Polymer Composites 34(4): 510-516.

Miville, V., Gélinas, N., Côté, M-A. 2013. Evaluation of the profitability of poplar cultivation in Quebec. The Forestry Chronocle 89(4): 538-548.

Paes Torquato, L., Auty, D., Hernández, R.E., Duchesne, I., Pothier, D., Achim, A.. 2013. Black spruce trees from fire-origin stands have higher wood mechanical properties than those from older, irregular stands. Canadian Journal of Forest Research 44(2): 118-127.

Paquin, M., Loranger, E., Hannaux, V., Chabot, B., Daneault, C. 2013. The use of weissler method for scale-up kraft pulp oxidation by TEMPO-mediated system from a batch mode to a continuous flow-through sonoreactor. Utrasonics Sonochemistry 20(1): 103-108.

Paradis, N., Auty, D., Carter, P., Achim, A. 2013. Using a standing-tree acoustic tool to identify forest stands for the production of mechanically-graded lumber. Sensors 13(3): 3394-3408 DOI.10.3390/s130303394.

Poaty, B., Riedl, B., Blanchet, P., Blanchard, V., Stafford, L. 2013. Improved water-repellency of black spruce wood surfaces after treatment in carbon tetrafluoride plasmas. Wood Science and Technology 47: 411-422.

Pothier, D., Fortin, M., Auty, D., Delisle-Boulianne, S., Achim, A. 2013. Improving tree selection for partial cutting through joint probability modelling of tree vigor and quality. Canadian Journal of Forest Research 43(3): 288-298.

Rebolledo, P., Salvo, L., Contreras, H., Cloutier, A., Ananias, R. 2013. Variation of internal checks related to anatomical structure and density in eucalyptus nitens wood. Wood and Fiber Science 45(3): 279-286.

Royer, M., Houde, R., Stevanovic, T. 2013. Non-wood forest products based on extractives – A new opportunity for Canandian forest industry. Part 2 – Softwood forest species. Journal of Food Research 2(5) DOI: 10.5539/jfr.v2n5p164.

Royer, M., Kinuano, N., Diouf, P.N. 2013. Forest extractives – The 4th pathway of the forest biorefinery concept. J-FOR 3:32-41.

Royer, M., Prado, M., Garcia-Pérez, M.E., Diouf, P.N., Stevanovic, T. 2013. Study of nutraceutical, nutricosmetics and consmeceutical potentials of polyphenolic bark extracts from Canadian forest species. PharmaNutrition 1(4): 158-167. DOI: 10.1016/j.phanu.2013.05.001.

Sattler, D.F., Comeau, P.G., Achim, A. 2013. Within-tree patterns of wood stiffness for white spruce (Picea glauca) and trembling aspen (Populus tremuloides). Canadian Journal of Forest Research 44(2): 162-171.

Segovia, F., Blanchet, P., Laghdir, A., Cloutier, A. 2013. Mechanical behaviour of sugar maple in cantilever bending under constant and variable relative humidity conditions. International Wood Products Journal 4(4): 225-231.

Sepúlveda, D., Bustos, C., Gacitúa, W., Dechent, P., Cloutier, A. 2013. Efecto del comportamiento termo-higromecánoico a macroescala de madera bajo compresión perpendicular a la fibra en las propiedades nanomecánicas de su estructura celular. Maderas, Ciencia y tecnologia 15(2): 205-222.

Shi, Y., Hadj Bouazza, A., Brouillette, F. 2013. Effect of surface addition of phosphorylated derivatives of cellulose on paper properties. Journal of Science and Technology for Forest Products and Processes 3(3): 29-33.

St-Pierre, F., Achim, A., Stevanovic, T. 2013. Composition of ethanolic extracts of wood and bark from Acer saccharum and Beula alleghaniensis trees of different vigor classes. Industrial Crops and Products 41: 179-187.

Tomczak, F., Riedl, B., Blanchet, P. 2013. ZnO plasma deposition on sugar maple: The effect on contact angle. Advances in Contact Angle, Wettability and Adhesion 1: 311-328.

Tomczak, F., Riedl, B. 2013. Contact angle on two north woods: influence of moisture content and plane of sections. Advances in Contact Angle, Wettability and Adhesion 1:297-310.

Vlad-Cristea, M.S., Landry, V., Blanchet, P., Ouellet-Plamondon, C. 2013. Nanocrystalline cellulose as effect pigment in clear coatings for wood. ISRN Nanomaterials Volume 2013, Article ID 930236.

Xing, S., Riedl, B., Deng, J., Nadji, H., Koubaa, A. 2013. Potential of pulp and paper secondary sludge as co-adhesive and formaldehyde scavenger for particleboard manufacturing. European Journal of Wood and Wood Products 71(6): 705-716.

Yemele, M.C.N., Koubaa, A., Cloutier, A., Soulounganga, P., Stevanovic, T., Wolcott, M.P. 2013. Effects of hot water treatment on properties of bark/HDPE composites. Industrial Crops and Products 42: 50-56.