Conference papers (2017-2020)

Peer-reviewed

Berti, S., Blanchet, P. (2020). International Scientific Conference on Hardwood Processing (ISCHP): A long journey in hardwood research. European Journal of Wood and Wood Products, 78, 839-840. https://doi.org/10.1007/s00107-020-01595-w.

Boivin, G., Ritcey, A., Morris, P., Landry, V. (2017). Black-stain Resistant Acrylic Latexes for Wood Coatings Applications. Proceeding of the International Research Group on Wood Protection the 48th Annual Meeting, Ghent, Belgique.

Cordier, S., Robichaud, F., Blanchet, P., Amor, B. (2019). Enhancing consistency in consequential life cycle inventory through material flow analysis. Proceeding: Sustainable Built Environment conference – Transition Towards a Net Zero Carbon Built Environment, 11-14 September 2019, Graz, Austria. IOP Conference Series: Earth and Environmental Science. https://doi.org/10.1088/1755-1315/323/1/012056.

Dagenais, C., Ranger, L. (2018). Revisiting heat delamination characteristics of adhesives in crosslaminated timber. In: Proceedings of the World Conference on Timber Engineering, Seoul, République Populaire Démocratique de Corée.

Dagher, R., Landry, V., Stevanovic, T. (2019). The use of Mössbauer spectroscopy for the analysis of products formed by the reaction of reactive dyes on wood’s surface. International Conference on Radiation Application, Belgrade, Serbia, September 16-18, 2019.

Dagher, R., Stevanovic, T., Landry, V. (2019). Wood coloring by reactive stains. International Scientific Conference on Hardwood Processing (ISCHP 2019), pp. 144-151.

Desgagnés-Leboeuf, A., Lehoux, N., Beauregard, R., Desgagnés-Leboeuf, G. (2019). Computer-Assisted Scheduling Tools in the Construction Industry: a Systematic Literature Review. 9th IFAC Conference MIM 2019 on Manufacturing Modeling, Management, and Control, Berlin, 28 au 30 août 2019.

Flamand-Hubert, M. (2020). Développer le goût de l’arbre : émergence des sensibilités arboricoles au Québec. In: Bouvet, R., Bochaton, M., Maiorana, R. (eds), Paroles d’arbres, histoires de jardins,  Observatoire de l’imaginaire contemporain.

Kasangana, P.B., Bhatta, S., Hozumi, H., Stevanovic, T. (2019). Effect of pre-extraction on composition of residual liquor obtained from catalytic organosolv pulping of sugar maple bark. Catalysis, Advanced Chemical Engineering and Technology, Valencia, Spain, September 5-6, 2019.

Kasangana, P.B., Stevanovic, T. (2019). Application of 2D NMR spectroscopy for structural elucidation of complex polysaccharide from sugar maple bark. International Conference on Radiation Application, Belgrade, Serbia, September, 16-18, 2019.

Kasangana, P.B., Stevanovic, T. (2019). Properties of complex sugar extracted from sugar maple bark. VII International Symposium on Pharmaceutical Sciences, Central University Martha Abreu Cayo Santa Maria, Cuba, June 23-30, 2019

Kevin, A., Landry, V., Ritcey, A. (2018). Thermochromic Additives Applied to Waterbased Acrylic Coating. Proceedings American Coatings Conference. American Coatings Conference, Indianapolis, États-Unis

Koumba Yoya, G., Stevanovic , T. (2017). New organosolv lignin for carbon fiber application, Intenational Symposium on researching and application of contemporary achievements in civil engineering in the field of materials and structures and XXVIICongress , Vršac (Serbie) 18-20. octobre 2017, pp. 345-355, Society for materials and structures testing of Serbia, editor Prof dr Dragica Jevtic and Emeritus prof dr Radomir Folic.

Mathis, D., Blanchet, P., Lagière, P. (2018). Decorative wood-based panels loaded with biosourced PCMs.12th IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning, Orford, Canada.

Morin-Bernard, A., Blanchet, P., Dagenais, C., Achim, A. (2019). Use of northern hardwoods in glued-laminated timber: A study of bondline shear strength and resistance to moisture. European Journal of Wood and Wood Products, 78, 891-903 . https://doi.org/10.1007/s00107-020-01572-3.

Ranger L., Dagenais, C. & Benichou, N. (2019). Fire Performance of Laminated Timber Assemblies. Interflam – 15th International Conference and Exhibition on Fire Science and Engineering, Royaume-Uni.

Ranger, L., Dagenais, C., Conroy Lum, T. T. (2018). Fire performance of firestops, penetrations, and fire doors in mass timber assemblies. World Conference on Timber Engineering, Séoul, République Populaire Démocratique de Corée.

Pepin, S., Blanchet, P., Landry, V. (2018). Development and characterisation of a penetrating barrier treatment for wood protection. In Proceedings of the Canadian Wood Preservation Association 39th Annual Meeting (Vancouver, BC), pp. 66-77.

Soula, M., Samyn, F., Duquesne, S., Landry, V. (2020). Polyelectrolyte complexes vacuum impregnationin yellow birch fire-protection. Proceedings AWPA. American Wood Protection Association. Annual Meeting, Lake Tahoe, États-Unis.

Soula, M., Samyn, F., Duquesne, S., Landry, V. (2020). Yellow birch fire-protection using Polyelectrolytes complexes. Proceedings IRG. 51e conference de l’Intertional research group on wood protection, Bled, Slovénie.

Stevanovic, T. (2019). Complete conversion of hardwood bark through organosolv biorefinery. VII International Symposium on Chemistry, Central University Martha Abreu, Cayo Santa Maria, Cuba June 23-30, 2019.

Stevanovic, T., Koumba, G. (2018). Polyphenols from catalytic organosolv process. Plenary lecture. Green Chemistry and Technology, Dublin, June 18-20, 2018.

Stevanovic, T., Koumba, G. (2017). Valorization of Maple Bark Through a New Organosolv Biorefinery. 5th International Conference on Sustainable Solid Waste Management. Athens, Greece, June 21-24, 2017.

Triquet, J., Blanchet, P., Landry, V. 2020 Evaluation of chemical densification of three hardwood species through in-situ electron beam polymerization, IRG 51, Rikli Balance Hotel, Bled, Slovenia, June 7-11, 2020.

Wiesner, F., Klippel, M., Dagenais, C., Dunn, A., Östman, B., Janssens, M., Kagiya, K. (2018). Requirements for engineered wood products and their influence on the structural fire performance. In WCTE2018, World Conference on Timber Engineering, Seoul, Republic of Korea. World Conference on Timber Engineering (WCTE).

Not peer reviewed

Aranda, R., Salenikovich, A., Dolan, J. D., Dechent, P. (2019). Characterisation of the Lateral Resistance of Stapled Shear Walls. Modular and Offsite Construction (MOC) Summit Proceedings, 446-453. https://doi.org/10.29173/mocs125

Bégin, C., Savard, M. M., Marion, J., Thiffault, E., Pinno, B. (2016). Boron in tree-ring as an indicator of forest disturbances in the Lower Athabasca Oil Sands region, Northeastern Alberta, Canada. European Geosciences Union General Assembly 2016, Vienna, Autriche.

Breton, C., Blanchet, P., Beauregard, R., Amor, B., Chang, W.-S. (2017). Analyse comparative du potentiel de lutte aux changements climatiques d’un immeuble résidentiel de moyenne hauteur en bois selon deux méthodes d’analyse du cycle de vie. Présentation orale, résumé publié dans le programme du Colloque [en ligne]. 85e congrès de l’ACFAS, Colloque 206 : Le secteur forestier québécois : super-héros de la lutte aux changements climatiques. Montréal, Canada.

Breton, C., Blanchet, P., Beauregard, R., Amor, B., Chang, W.-S. (2017). Just How « Green » are Timber Buildings? Assessing the Climate Change Mitigation Potential of a Mid-Rise Timber Building through Dynamic LCA. Présentation orale, résumé accepté pour le Conference Proceedings. FPS71st Convention. Starkville (MS), États-Unis.

Breton, C., Blanchet, P., Beauregard, R., Amor, B., Chang, W.-S. (2017). Unveiling the Climate Change Mitigation Potential of a Mid-Rise Timber Building Using a Dynamic LCA Approach. Présentation orale, résumé accepté pour le LCA XVII Paper Proceeding. LCA XVII. Portsmouth (NH), États-Unis.

Desgagnés-Leboeuf, A., Lehoux, N., Beauregard, R. (2019). Classification d’outils d’aide à la planification de chantiers de construction. 4ème Conférence Gestion de Projet UQTR23-24 mai 2019, 19 p.

Garzon, A., Wang, X., Hagman, O., Blanchet, P. (2018). Future Requirement For Sustainable Building Envelope. WCTE 2018 proceedings. World Conference on Timber Engineering (WCTE) 2018, Seoul, Republic of Korea.

Hosseini, Z., Laratte, B., Amor, B., Blanchet, P. (2019, November). An overview of circular economy for wooden construction. In Ecodesign 2019.

Pilon, D. S., Salenikovich, A. ,Palermo, A., Sarti, F. (2017). Post-tensioned CLT wall systems with multiple rocking segments. INTER 2017 Proceedings. Meeting 50. International Network on Timber Engineering Research. Meeting 50, Kyoto, Japan.

Roussel, J. R., Béland, M., Caspersen, J., Achim, A. (2018). Removing Bias From Lidar-Based Estimates Forest Canopy Metrics: Accounting For The Effects Of Pulse Density, Footprint Size And Beam Incidence Angle. In New Frontiers In Forecasting Forests 2018.

Sorelli, L., Naud, N., Lamonthe, S., Joly-Lapalice, C., Blanchet, P. (2019). Fostering composite structures of UHPC and timber. In International Interactive Symposium on Ultra-High Performance Concrete (Vol. 2, No. 1). Iowa State University Digital Press.